Social Icons

Pages

Monday 26 October 2009

Pre-fabricated, direct, single-visit, ceramic inserts

Ceramic inserts have been designed as single-visit systems and an alternative to conventional ceramic restorations produced in two appointments by means of indirect technique. Luting ceramic inserts with a small amount of composite resin is expected to reduce the amount of polymerisation shrinkage by reducing the bulk of resin composite needed to restore the tooth. Another advantage is that the occlusal contacts can be placed on the ceramic surface, rather than on the composite, for longer-term stability.

One of the most studied systems is Cerana, which utilises pre-etched and silanated leucite inlays with matched diamond burs. After caries removal and the preparation of a usual adhesive-type preparation for bonded restorations (Figure 1), the cavity is refined using one of three conical burs (Figure 2). Enamel and dentine are etched if etch-and-rinse adhesive is used or self-etch systems are applied and cured. Composite is then applied to the cavity, filling it to or just above the enamel-dentin junction (Figure 3). A thin coat of composite can be applied to the ceramic insert which is then pressed into the cavity. Excess resin composite is removed and the restoration is cured for 20 s or 40 s depending on the light-curing unit (Figure 4). The occlusal contour of the inlay is shaped to match the surrounding enamel and the occlusion adjusted (Figure 5). The restoration is cured for a further 20 s or 40s and polished.

(Figures from manufacturer's recommendations for use. Nordiska Dental AB, Sweden)
A 3-year prospective clinical trial has shown that “The results indicate that Cerana is an alternative to composite resin restorations in Class I situations, but should be avoided in connection with Class II tunnel preparations.” (Odman 2002)

Another 8-year prospective clinical trial has shown that “Cerana is acceptable in terms of aesthetics, patient acceptance, occlusal wear and ease of use and is a good alternative for a single-visit, tooth coloured restoration in suitable cavity shapes.” (Millar & Robinson 2006)

In an in vitro study Cerana inserts luted with flowable composite in Class V cavities showed significantly less microleakage than those cemented with the high-viscous material only at the gingival margins. Microleakage was reduced around inserts compared to the bulk filling with flowable composites but no difference was observed between inserts and bulk filling with high-viscous composite material (Salim et al. 2005).

It was also shown that in vitro thermocycling 4000 times between 5 and 55 degree C does not increase microleakage around Cerana inserts (Santini et al. 2006). After thermocycling, Cerana inserts showed siginificantly less microleakage along both occlusal and gingival margins compared to Beta Quartz glass-ceramic inserts and Tetric Ceram resin-based composite. Both findings were attributed to the coefficient of thermal expansion of Cerana inserts which approximates that of enamel (Tan & Santini 2005; Santini et al. 2006).

References:
  1. Odman P. A 3-year clinical evaluation of Cerana prefabricated ceramic inlays. Int J Prosthodont 2002; 15: 79-82.
  2. Millar BJ, Robinson PB. Eight year results with direct ceramic restorations (Cerana). Br Dent J 2006; 201:515-520.
  3. Salim S, Santini A, Safar KN. Microleakage around glass-ceramic insert restorations luted with a high-viscous or flowable composite. J Esthet Restor Dent 2005;17: 30-38.
  4. Santini A, Ivanovic V, Tan CL, Ibbetson R. Effect of prolonged thermal cycling on microleakage around Class V cavities restored with glass-ceramic inserts with different coefficients of thermal expansion: an in vitro study. Prim Dent Care. 2006 Oct;13(4):147-53.
  5. Tan CL, Santini A. Marginal microleakage around class V cavities restored with glass ceramic inserts of different coefficients of thermal expansion. J Clin Dent. 2005;16(1):26-31.

Saturday 24 October 2009

News from jobs.ac.uk

Research Fellow in Biomaterials for Skeletal Regeneration
(Click for more information)

Leeds Dental Institute
University of Leeds - Faculty of Medicine and Health

Salary: £29,704 to £35,469 p.a. It is likely that an appointment will be made at or below GBP 31,513 p.a. since there are funding limitations which dictate the level at which the appointment can start.

Application deadline: 3 November 2009

Thursday 22 October 2009

Essential toolkit for a dental materials scientist: Search engine (Part II)

ISI Web of Knowledge (Web of Science)

ISI Web of Knowledge (also known as Web of Science) is a research platform by Thomson Reuters that comprises seven databases containing information gathered from thousands of scholarly journals, books, book series, reports and conferences. It contains three multidisciplinary indexes to the journal literature of the sciences, social sciences and art and humanities; two conference proceedings citation indexes for sciences, social sciences and humanities and two chemistry databases (Index Chemicus and Current Chemical Reactions).

Search panel is very intuitive and user-friendly and allows search by various categories, similar to Medline, such as topic, title, author, title, journal, year of publication, address, conference, language, document type, funding agency and grant number.



A search can be saved under Marked List and forwarded to an email address as plain text or html.

ISI web of Knowledge offers an option to create citation reports which include the total and average number of times certain items (e.g. journal articles) have been cited and also the number of citations per year. Furthermore, ISI Web of Knowledge displays a list of articles in which an article of interest has been cited.


Cited Reference Search is an option to search for articles that cite a certain person’s work. A search can be done using a person’s name, the journal where an article is published and/or the year of publication.


Another useful tool is that EndNote Web version is integrated with ISI Web of Knowledge. This allows a search to be saved as an Endnote bibliography and directly cited while typing. A search can also be exported to other types of Reference software if you have it installed on your computer (EndNote, Reference Manager or ProCite). I will address EndNote as part of the essential toolkit of a dental materials scientist in a separate blog post.

Saturday 17 October 2009

Essential toolkit for a dental materials scientist: Search engine (Part I)

MEDLINE

For many clinical researchers, MEDLINE is probably the starting point for any article search. MEDLINE comprises over 5000 journals published worldwide and is the largest part of the PubMed database, a service of the U.S. National Library of Medicine. PubMed also contains other life science journals.

As a result of U.S. National Institutes of Health Public Access policy aimed at increasing free access to articles, Pubmed Central (PMC) has been created as a free digital archive of biomedical and life sciences journal literature. It contains journals which submit articles regularly but also articles published by NIH-funded researchers in journals currently not on the PMC list. Full text is available in either HTML or PDF format.

A particularly useful tool available at PubMed is “MyNCBI” which allows searches to be saved and filtering options and automatic searches set up. It is located in the top right corner of the PubMed homepage and requires registration (free). MyNCBI offers various features but among the most useful are automatic searches and collections.



Automatic search: Once you enter keywords and search results are generated, you should save the search by clicking the “Save Search” option next to the search box. The search is saved to MyNCBI. Then, you can enable automated search in MyNCBI and the results will be emailed to you daily or once a week or month, according to the settings. The same keywords from the initial search will be used every time in the automated search.

Collection: Once you enter keywords and search results are generated, you should save the search by clicking the “Send to” option and selecting “Collections” from a drop down menu. A collection can be made public by selecting the appropriate option in MyNCBI, in which case a direct URL or HTML for web pages and blogs are generated.

You can access MyNCBI through PubMed homepage, but if no PubMed search is intended, then you can use a direct link to MyNCBI


Friday 16 October 2009

News from jobs.ac.uk

Lecturer in Restorative Dentistry
(Click on the link for more information)

University of Leeds - Leeds Dental Institute
Salary on the Clinical Lecturer scale (£30,685 - £57,084 pa)

Application deadline: 24 October 2009

Monday 12 October 2009

Resin-based materials: Degree of conversion

Resin-based materials, such as resin-based composites, adhesives, pit & fissure sealants and resin cements, undergo monomer to polymer conversion during both light-activated or chemically-activated polymerisation. Whilst conversion is an inherent property of resin-based materials, the degree of conversion (DC) depends on material chemical composition and curing conditions. The DC affects mechanical properties of resin-based materials, such as wear, fracture toughness, hardness, flexural modulus and fatigue. Less than optimal conversion may compromise mechanical properties but also result in leaching of monomers from restorations.

Traditionally, manufacturers' technical and scientific data did not incorporate results of internal or external tests for the DC. Even most recent materials often lack these data but there seems to be a growing understanding of the importance of this property.

The DC of resin-based materials in dental studies has been determined using various methods for more than two decades, but recently, the most widely accepted and used methods are infrared and Raman spectroscopy. These are based on measuring the changes in either the absorbance or scattering effect of those molecular groups which take part in polymerisation of resin-based materials. The DC is determined as the ratio of absorbance or scattering of these groups and a certain internal standard in uncured and cured material. An internal standard is another molecular group which does not take part in polymerisation and, thus, its infrared absorbance or Raman scattering remains constant before and after polymerisation.

It is very important to point out that the DC indicates the number of unreacted methacrylate or other polymerisable groups and not the amount of unreacted monomers in the polymer. The DC of e.g. 70% indicates that there is 30% of uncreacted groups and not 30% of free, unreacted monomers trapped within the polymer network that could theoretically leach out. Cross-linking monomers in resin-based materials most often contain more than one polymerisable group which means that cross-linking may occur via some but not all such groups. Furthermore, unreacted polymerisable groups always exist at the ends of polymer chains. There have been some estimates that in resin-based composites with the DC of around 70%, the amount of unreacted monomers is actually less than 10%. This depends on material chemical composition and may vary significantly in different resin-based materials.

Thursday 8 October 2009

Dental Research in the UK: Funding

In 2006, the British Society for Dental Research (BSDR) commissioned a position paper on oral and dental research within the United Kingdom which would serve as a foundation and a framework for a national plan for oral and dental research. This paper was written by Iain Chapple, Paula Farthing, David Williams and Michael Curtis in 2006 and updated in December 2007.

According to this strategic review, the UK dental school research income in the period 2000-2004 was less than 2% of medical schools research income. Knowing that the NHS spend on dental care was about 5% of the total NHS healthcare spend, this indicates that dental research was under funded compared to medical research.

The majority of dental research funding was provided by UK government, industry and charities over this five-year period. Funding from research councils, EU and other sources constituted up to one third of the overall funding per year. It is interesting that most of the charitable funding came from the Wellcome Trust since there is no national charitable source dedicated to oral research.

The best financed research in UK dental schools has been basic with more than two thirds of awarded grants. Less than one third of grants was awarded for clinical research in dental schools. These data are based on grants awarded between 2000 and 2005 by the Medical Research Council (cca. £6m), Wellcome Trust (£8.68m), Biotechnology and Biological Sciences Research Council (£cca. 1.2 m) and Engineering and Physical Sciences Research Council (£520k). The percentage of dental materials research funding has not been reported in this position paper.

Some of the identified reasons for under funding dental research in UK dental schools include the lack of representation on review panels of research councils and major charities, the absence of a national charitable source for funding oral research and underscoring grant proposals by internal panels in spite of high scores by external expert reviewers.

Four priority areas have been proposed in this position paper:

  • Establishing a dedicated Oral and Dental Research Charity
  • Better representation for oral and dental research on review panels
  • Developing critical mass through nationally-coordinated research consortia and
  • Encouraging inter-school collaboration.